Machine Installation; Handling; Handling The Product; Storage - N'DUSTRIO LP302 Instrucciones Para Uso Y Mantenimiento

Pict. 4

6. MACHINE INSTALLATION

6.1

Handling

6.1.1 Handling the product

The machines must be handled strictly as shown in pict. 4 regarding the grip points indicated
for lifting with a lift truck.
Latch the machine in a way that secures no vibration or shocks during transportation.
N.B.: Slinging with ropes not recommended.
After unpacking, make sure the appliance has not been damaged due to transportation. If it
has been, do notify the seller about this problem. If the damage might question the machine's
safety, do not install the appliance. See chapter 8 for disposal of the packing material.

6.1.2 Storage

Storage temperature: min. +4°C - max +50°C - humidity <90%.
The stored parts should be checked periodically, to detect any sign of deterioration.
Do not put anything on the machine, even if packed in its box.
6.2

Prepare for installation

This is just a guide-line for the machine installation.

6.2.1 Room features

Install the machine, in a room closed to weather and with a guaranteed temperature-range
between 5 and 35°C.
The machine is equipped with thermostatic sensors to manage the temperatures. To
guarantee a proper functionality these sensor shall not operate at a room temperature
below 5 C°.
For this reason, it is fundamental that before starting the machine reaches the room tem-
perature.
EN
page 39