Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
CONTENTS
1
1.1
1.2
1.3
2
MODELS AND PRODUCT DESCRIPTION
2.1
Description
2.2
3
PRODUCT TECHNICAL SPECIFICATIONS
4
4.1
4.2
4.3
4.4
4.4.1 Installation
4.4.2 Limit stops adjustment
5
6
7
8
9
DISPOSAL OF THE PRODUCT
10
10.1
10.2
Technical characteristics
10.3
10.4
10.5
11
1 GENERAL PRESCRIPTIONS
1.1 SAFETY PRESCRIPTIONS
This installation manual is addressed exclusively
to professionally skilled personnel. Read all the
instructions carefully before starting the installation
procedures. Any operations that are not expressly
set down in these instructions are to be considered
prohibited; improper use may result in damage to
the product and place persons and property at risk.
The manufacturer declines all liability for failure to
observe best technical practices in barrier system
construction and for any possible deformations
that may occur when using the product. Store
this manual in a safe place for future reference.
The design and construction of the devices fitted
on the BORDER model as well as this manual
are in full compliance with statutory legislation. In
consideration of potential hazards that may arise
during the installation and use of BORDER, also
the installation procedures must be carried out in
full compliance with the applicable laws, standards
and regulations; specifically:
1.2 INSTALLATION PRESCRIPTIONS
• Before starting the installation procedures
make sure you have any additional devices and
materials that may be required to complete the
BORDER barrier system in consideration of the
specific application.
• The automation system must not be used until
18
COMUNELLO ®Copyright 2015 - All right reserved
the transit area has been made safe.
• Dispose of packaging materials in compliance
with local regulations.
1.3 OPERATING PRESCRIPTIONS
• No modifications can be made to any part of
the product unless specified in this manual.
Unauthorized modifications of the product are
likely to lead to malfunctions. The manufacturer
declines all liability for damage caused by
unauthorized modifications.
• The parts of the automation system must never
be immersed in water or other liquids. During
the installation procedures ensure that no solid
objects or liquids penetrate inside the control
unit or other open devices.
• If liquids penetrate any parts of the automation
system, disconnect the electrical power supply
immediately and consult technical service; the
use of BORDER in such conditions may give rise
to potentially hazardous situations.
• Keep all parts of the BORDER barrier system
away from heat sources and open flames;
exposure to heat or flames may damage the
devices and cause faults, fire, or hazardous
situations.
• When the system remains unused for a long
time, remove the optional battery and store it
in a dry place to avoid the risk of leakage of
harmful substances.
• Any operations that require parts of the
BORDER barrier system to be opened must be
performed with the control unit and the electrical
power supply disconnected; if the disconnect
device is not clearly visible from where you are
working, attach a warning notice to the effect:
"WARNING - MAINTENANCE IN PROGRESS".
• In the case of tripping of circuit breakers or
blowing of fuses, find the fault and remedy it
before resetting the circuit breaker or changing
the fuse.
• If the fault cannot be remedied using the
information given in this manual, consult
technical service.
2 MODELS AND PRODUCTS DESCRIPTION
2.1 DESCRIPTION
Sturdy and easy to install, the BORDER electromechanical barrier system
is suitable for residential, public and industrial applications. Thanks to the
on-board electronic control unit any type of barrier system function can
be programmed.
Publicidad
Capítulos
Tabla de contenido
