General Safety Instructions; Inserting Batteries - LaserLiner SuperCross-Laser 2 Manual De Instrucciones

The automatic cross-line laser for professional do-it-yourself enthusiasts
The laser for interior-finishing work that has 2 laser lines (635 nm). Readily visible laser lines are
outstanding for aligning tiles, wall studding, windows, doors, etc. Simple to use by virtue of its
magnetic-dampened pendulum system - the unit aligns itself automatically in seconds. Its height-
adjustable bracket makes the SCL 2 truly versatile - on the tripod, on the wall and on magnetic-res-
ponsive objects. The slope-mode feature is an extra that permits gradients to be laid out. An integra-
ted transport restraint protects the pendulum system against damage. Accuracy, 5 mm / 10 m.
Includes: Tripod/wall bracket, soft case and batteries.

General safety instructions

Read the operating instructions and the enclosed brochure "Guarantee and additional notices" com-
pletely. Follow the instructions they contain. Safely keep these documents for future reference.
Further safety and supplementary notices at: www.laserliner.com/info
Caution: Do not look directly into the beam. Lasers must be kept out of reach of children. Never
Laser radiation!
Do not stare into the beam!
Class 2 laser
< 1 mw · 635 nm
EN 60825-1:2007-10
and after extended periods of storage. We also wish to point out that absolute calibration is only
possible in a specialist workshop. Calibration by yourself is only approximate and the accuracy of the
calibration will depend on the care with which you proceed.
Note: Always turn off all lasers and latch the pendulum in place before transporting, ON/OFF
switch in its "OFF" position!

Inserting batteries

Open the battery compartment (2) and
insert batteries (4 x type AA) according to
the symbols. Be sure to pay attention to
polarity.
intentionally aim the device at people. This is a quality laser measuring
device and is 100% factory adjusted within the stated tolerance. For
reasons of product liability, we must also draw your attention to the
following: Regularly check the calibration before use, after transport
–
+
ENGLISH
–
+
AA
AA
AA
AA
SuperCross-Laser 2
2
7