Lock Function - ProMed T-6 Manual Del Usuario

o
29
peratIng the unIt
Set the parameter
In the user programs (P1~P4), the user can set the pulse rate, pulse
DE
width and treatment time by pressing the "SET" button (F). The LCD
will be display the current parameter which you want to set like fol-
lowing:
EN
FR
IT
ES
To set the parameter you can press "
Remark:
NL
The set range of pulse rate, pulse width and treatment time in the user
program, please refer to section programs.
RU
Adjust the intensity and Start to treatment:
PL
There are two intensity adjustment knobs (C) for each channel on the
side of the unit. By turning the controls up, the output intensity will
be increased, when the output intensity above 1mA, the device will
SE
be started to work. The maximum output intensity is 100mA.
FI
Remark:
The Promed T-6 has special backlight function:
a) In the normal state the backlight is green;
b) If the output intensity is over 65mA, the backlight will be changed
c) If the electrode pad connection in wrong way or not connect the

Lock function

In order to use the device safely, after you adjusted the output inten-
sity, please press the "SET" button (F) and "
" (G) or " " (H) button.
same time, the lock function mark "
LCD (The device will be locked). This is a safety feature to prevent
accidental changes to your settings and to prevent accidental incre-
ases the intensity level. If you want to unlock, Press the "SET" button
(F) and "
"
blue and the user should be taken care.
electrodes, when the output intensity over 10mA, the backlight
will change to red and flash, and the intensity will be reseted
automatically.
" button (G) at the same time, the lock function mark
" (9) will disappear.
" button (H) at the
" (9) will show up on the