Dri-Eaz DriTec 4000i Ajustes Del Usuario

DriTec 4000i USER SETTINGS
Only menu items followed by a greater-than symbol (>) may be adjusted. If no keys are selected for 5 minutes the display will return to
normal display mode. Items without the symbol (>) are for information only and cannot be changed or reset.
MAIN MENU: Press
DISPLAY MENU
to proceed to the
next menu item. ↓
JOB HOURS
RESET? >
INLET OUTLET
For information only.
000° 00% 000°00%
REACT
For information only.
000° 00%
HEATER1 CURRENT
For information only.
00 A
HUMIDISTAT MODE
OFF >
HUMIDISTAT
SETPOINT 00% >
RH MIN SETPOINT
00% >
LANGUAGE
ENGLISH >
TEMP UNITS
°F >
LIFE HOURS
For information only.
00000 HRS
(Returns to
top menu item.)
The following section available only on wireless-equipped units.
SENSOR ID
000000000 >
(Returns to
top menu item.)
SUBMENUS: Press MENU SELECTION to proceed
→
to the next submenu item.
JOB HOURS
Press
XX.X
HUMIDISTAT MODE
Press
ON >
Press to cycle through 5 – 60% at 5% increments. Press
Press to cycle through 0 – 30% at 5% increments. Press
IDIOMA
ESPANOL >
TEMP UNITS
Press
°C>
SENSOR TYPE
00000 >
to reset to 0.
to display ON or OFF. Press
SPRACHE
DEUTSCH >
to display °F or °C. Press
SENSOR REVISION SENSOR CONF REV
00000 >
to accept.
to accept.
to accept.
Press to display lan-
LANGUE
guage options. Press
FRANCAIS >
accept.
to accept.
00000 >
to