Publicidad
Operating instructions
1. Insert the USB cable into the 5V power
2. Plug the power supply into an AC power
3. Open the lid of your Widex DRY-GO UV.
4. Remove the batteries from the hearing
5. To begin the dying process, touch the
14 0251 001 #05.indd 8
supply and the Micro-USB connector
into the socket on the rear side of your
drying station. Illustration 1.
socket. See illustration 1.
aids. Clean your earmolds and place
them along with your hearing aids in th
drying station with the battery drawer
open. See illustration 2.
sensor button and close the lid. See
Illustration 2.
•
The LED light will indicate that the
unit is functioning and will blink
during the first eight minutes that
the UV-C light is on.
•
Towards the end of the drying cycle,
the UV-C light will automatically turn
on for another eight minutes
8
27-11-2014 08:42:34
Publicidad
