Bimar ZKX40A7 Folleto De Instrucciones página 30

Default parameters
Adjustment range
The programme uses the upper and lower heating elements. The default
time and temperature are 30 min. and 180°C. When the programme is
selected, the symbols
Baking
the programme and adjust the parameters.
The display now flashes the time (00:30): turn the knob to increase or decrease the time,
and press it to confirm the selection. The display now flashes the temperature (180): turn
the knob to increase or decrease the temperature, and press it to confirm the selection. The
display will stop flashing, and the pre-heating function will start: the symbol
up. Once the temperature has been reached, the symbol
goes out and a sound signal (about 10 "Beeps") is made to tell you to insert the food in the
oven, and also the programmed cooking will start that will end at the end of the set time.
Default
parameters
Adjustment
range
The main function is baking, during which steam is injected at intervals.
The programme uses the upper and lower heating elements, and the
steam generator. The default time and temperature are 30 min. and
180°C.
Baking and
steaming
When the programme is selected, the symbols
the programme and adjust the parameters. The display now flashes the time (00:30): turn
the knob to increase or decrease the time, and press it to confirm the selection. The display
now flashes the temperature (180): turn the knob to increase or decrease the temperature,
and press it to confirm the selection. The display stops flashing, the cooking process starts
and ends when the set time expires.
Time (h:min)
Default 00:30
parameters
Adjustment 00:01
range
The function cooks like when frying but without immersion in oil. The
programme uses the rear heating element combined with the convection
system. The default time and temperature are 30 min. and 180°C. When
the programme is selected, the symbols
Air frying
the knob to access the programme and adjust the parameters.
The display now flashes the time (00:30): turn the knob to increase or decrease the time,
and press it to confirm the selection. The display now flashes the temperature (180): turn
the knob to increase or decrease the temperature, and press it to confirm the selection. The
display will stop flashing, and the pre-heating function will start: the symbol
up. Once the temperature has been reached, the symbol
00:30
~
00:01
Time (h:min)
00:30
~
00:01 02:00
~
02:00
02:00
and and flash: press the knob to access
and flash: press the knob to access
Temperature (°C)
180
~
120
30
100
~
100 110
and
Temperature (°C)
180
~
100 230
230
and and
goes out and a sound (about
will light
flash: press
will light