Bimar ZKX40A7 Folleto De Instrucciones página 32

When the function is selected, the symbols
press the knob confirm and turn it to select the programme " C-1" o " C-2:
C-1: steam generator cleaning for 50 min.
C-2: cleaning and disinfection of the cavity for 25 minutes at 100°C.
Cleaning
Descaling C-1
4. After the steam generator has been in operation for about 100 hours, with the flashing
symbol , the system warns that scale must be removed.
5. The descaling mixture (water and descaling agent) must be prepared according to the
instructions on the packet, or at a ratio of 1:8 (125ml descaling agent per litre of water).
Place the mixture in the tank in a quantity not less than the minimum level indicated.
Make sure that the descaler does not damage plastic or metal parts.
6. 20 minutes before the programme ends, remove the tank, empty it of the descaling
agent and pour in clean water. The symbol
tank is reinserted in its place: the programme will then resume. 10 minutes before the
end of the programme, remove the tank again, empty it, pour in new clean water, and
reinsert the tank in its place to proceed. When the programme has finished, the symbol
remains lit.
Whenever any programme is running, if the tank is empty or the water is
below the minimum level, the system interrupts the operation of the oven and
warns you by flashing the symbol
Empty
and excluding the operation of all the keys on the panel.
Water
Tank
The programme resumes operation as soon as water is added to the tank. The keys become
operational again, the symbol
When the symbol
running. Once the temperature is reached the symbol goes out.
Preheating
The
The symbol
inoperative: this is for the "Child lock" in operation. To make the buttons
operational and exclude the function, press the
seconds: the symbol
The
the programme is finished.
Cleaning
and the sound signal go out.
is lit, it indicates that the pre-heating programme is
End
and symbols light up when the programme is finished.
lights up when all the keys on the control panel are
goes out.
symbol indicates that descaling is in progress and goes out when
will flash and a "Beep" is heard until the
, making a sound (about 10 "Beeps"),
32
and on the knob flash:
button for about three