Bimar ZKX40A7 Folleto De Instrucciones página 31

10 "Beeps") is made to tell you to insert the food in the oven, and also the programmed
cooking will start that will end at the end of the set time.
Default
parameters
Adjustment
range
The function contains 31 cooking and reheating programs, the list of which
(F-00, F-01, F-02, ....F-31) is shown in the table below, including details of
food, times, temperature and weight. When the function is selected, the
Menu
symbols
Press the knob to access the programme, and turn it to select the function No. (F-00, F-01,
F-02, ....F-31) , and then press it to confirm the selection. The display stops flashing and the
selected programme starts. At the same time, the key
program time lights up, operating as described in the previous paragraph: when the new
time is confirmed, cooking/heating starts again and will end when the set time has expired.
When the function is selected, the symbols
press the knob to access the programme and to adjust the parameters.
Defrosting
The display now flashes the time (00:20): turn the knob to increase or decrease the time,
and press it to confirm the selection. The display now flashes the temperature (55): turn the
knob to increase or decrease the temperature, and press it to confirm the selection. The
display stops flashing, the programmed heating starts and ends when the set time expires.
Time (h:min)
Default 00:20
parameters
Adjustment 00:05
range
When the function is selected, the symbols
press the knob to access the programme and to adjust the parameters.
Fermenting
The display now flashes the time (00:40): turn the knob to increase or decrease the time,
and press it to confirm the selection. The display then flashes the temperature (40): turn the
knob to increase or decrease the temperature, and press it to confirm the selection. The
display stops flashing, the programmed heating starts and ends when the set time expires.
Time (h:min)
Default 00:40
parameters
Adjustment
00:05
range
Time (h:min)
00:30
00:01 ~ -02:00
and flash, as does the display, which shows No. " F-00 ":
~
02:00
~
02:00
that allows changing the
Temperature (°C)
55
~
55 -60
Temperature (°C)
40
~
30 50
31
Temperature (°C)
180
120 ~ 230
and on the knob flash:
and on the knob flash: