BEFORE USE
1 • Assemble your vacuum
cleaner (fig. 1) - (fig. 2)
2 • Select the right
accessory* (fig. 2)
VACUUMING
3 • Turn on your appliance
(fig. 3) - (fig. 4) - (fig. 5)
4 • Adjust the suction
power* (fig. 6)
Max : floors
Min : furniture, delicate fabrics...
CAUTION
without a dustbag and filters.
5 • Turn off your appliance
(fig. 7) - (fig. 8)
STORING
GB
MAINTENANCE
AND CLEANING
IMPORTANT
your appliance before maintenance or
cleaning.
6 • Change the dustbag
(ref ZR 0022)
The dustbag full indicator*
that the bag is full or blocked with dust
particles. If the suction is weak, the nozzle is
off the ground and the suction power is on
maximum, change the dustbag.
(fig. 11) - (fig. 12) - (fig. 13)
* According to model
Never turn the appliance on
(fig. 9)
Always turn off and unplug
informs you
(fig. 10)
7 • Cleaning the motor
protection
(fig. 10) - (fig. 14) - (fig. 15)
(fig. 16)
CAUTION
The motor protection foam
filter should always be in place during use.
IMPORTANT
Every 10 changes of the dustbag:
- clean the motor protection foam filter with
warm, soapy water (using a gentle
detergent). Rinse and leave to dry before
putting back into place.
8 • Replacing the micro-
active filter
(fig. 17) - (fig. 18) - (fig. 19)
IMPORTANT
Every 10 changes of the dustbag:
- replace the micro-active filter.
9 • Cleaning your vacuum
clean
Clean the housing of the vacuum cleaner
with a soft and humid cloth and let dry.
(fig. 20)
IMPORTANT
inflammable or abrasive cleaning products.
11
(ref ZR 0022)
Do
not
use
strong,