I Special Features; Copying A Video Tape; Mts (Multi-Channel Television Sound) System - Hitachi DV-PF2U Manual De Instrucciones

COPYING A VIDEO TAPE

You can make copies of video tapes made by friends or
relatives for your enjoyment.
Warning:
Unauthorized recordings of copyrighted video tapes
may be an infringement of copyright laws.
Connect the recording DVD/VCR (this unit), the play-
ing VCR (another source) and your TV using the fol-
lowing diagram.
¡
You can use the AUDIO/VIDEO input jacks on the
front panel of the DVD/VCR instead of using the
jacks on the back.
[Recording VCR]
(this unit)
ANT - IN
L
AUDO
R
ANT - OUT
VIDEO
CH3 CH4
Coaxial cable
(supplied)
[TV set]
(Use for monitoring)
ANT in
1
Insert a pre-recorded tape into the playing
VCR.
2
Insert a tape with a safety tab into the
recording VCR.
3
Press the SPEED Button on the recording
VCR to select the desired recording speed
(SP/SLP).
¡
When you use the A/V input jacks on the back of the
DVD/VCR, select "L1" position by pressing [0], [0],
[1] on the remote control or the CHANNEL(o/p) Buttons.
¡
When you use the A/V input jacks on the front of the
DVD/VCR, select "L2" position by pressing [0], [0],
[2] on the remote control or the CHANNEL(o/p) Buttons.
Note
"L1" and "L2" are found before the lowest memo-
rized channel. (Example: CH2)
4
Press the IRT Button on the recording VCR.
5
Begin playback of the tape in the playing
VCR.
¡ For best results during dubbing, use the
DVD/VCR's front panel controls whenever possi-
ble. The remote control might affect the playing
SPECIAL FEATURES
VCR
DVD
DVD
VCR DVD/VCR
IN OUT COMPONENT
VIDEO OUT
AUDIO Y
OUT
DIGITAL
S-VIDEO
L
C B AUDIO OUT
OUT
COAXIAL
R C
R
Audio/Video cables
(not supplied)
OUT
LEFT RIGHT
IN
VIDEO
AUDIO
[Playing VCR]
(another source)
DVD/VCR's operation.
¡
Always use video-quality shielded cables with
RCA-type connectors. Standard audio cables are not
recommended.
¡
You can use a video disc player, satellite receiver, or
other audio/video component with A/V outputs in
place of the playing VCR.
TO MONITOR THE RECORDING
1
Turn on the TV and set the TV to channel 3 or 4.
¡
Now set the CH3/CH4 switch on the back of the
DVD /VCR to match the channel selected on the TV.
2
Press the VCR/TV Button on the recording
VCR so that the VCR/TV Light comes on.
MTS (Multi-Channel Television
Sound) SYSTEM
When you play a VHS tape, or receive a broadcast on the
DVD/VCR tuner channel you are watching, the current
status will appear when you press
the DISPLAY Button on the
remote control. When you record
a MTS broadcast signal, you need
to set it to MTS mode.
1)*
When a program is broadcast in stereo,
STEREO appears. When a program is
broadcast in second audio, SAP appears.
¡ Although a program may be broadcast in both stereo
and sub audio, you must select the Recording mode to
TV STEREO or SAP before you record a broadcast.
2)*
While the VCR is set in HiFi stereo mode,
HiFi appears on the TV screen. While the
VCR is set in monaural (MONO) mode,
HiFi disappears from the TV screen.
¡
If you play non-HiFi tapes while the VCR is set in
HiFi, HiFi will disappear from the TV screen and the
VCR will automatically play in monaural.
MTS RECORDING/MONITOR MODE
Type of Display on the STEREO/SAP
broadcast TV screen
Regular
-None-
(monaural audio)
Stereo STEREO
broadcast
SAP TV STEREO*
Bilingual
broadcast
TV STEREO*
Stereo & STEREO
Bilingual SAP
broadcast
*
– 25 –
STOP 12:00AM
STEREO
SAP
SP 0:00:00
Hi-Fi audio track
Selection (2-channel)
L-channel R-channel
-Invalid-
Mono Mono
- nvalid- I L R
Main audio Main audio
program program
Sub audio
Sub audio
SAP*
program program
L R
Sub audio Sub audio
SAP*
program program
VCR
CH 32
1)*
2)*
HIFI
Normal audio
track
Mono
L+R
Main audio
program
Sub audio
program
L+R
Sub audio
program
EN
2C15