Starting From A Desired Time Count; Marker; Random (Audio Cd); Repeat - Hitachi DV-PF2U Manual De Instrucciones

CHAPTER SEARCH:
1
Directly enter the desired chapter number
with the numeric Buttons when the disc is
being played or paused.
¡ When you finish entering the number, the selected
title or chapter will start automatically.
TRICKS WITH THE SKIP BUTTONS (H, G)
If the SKIP Button G is pressed during playback or
while playback is paused, the current track/chapter will be
skipped and the next track/chapter will start. When the
SKIP Button H is pressed once, the top of the current
track/chapter will be located for replaying. When the SKIP
Button H is pressed again within 2-seconds after play-
back begins, the previous track/chapter will be located.
STARTING FROM A DESIRED
TIME COUNT
1
Press the SEARCH MODE Button twice.
2
Press the numeric Buttons to set the
desired time count.
¡ Example: 1 hour, 23 minutes
and 30 seconds
1 → 2 → 3 → 3 → 0
Notes
¡
In the case of DVD, Time Search in Title is effec-
tive. (But Time Search in Chapter is ineffective.)
¡ In the case of CD, Time Search in Track is effective.
(But Time Search in the entire disc is ineffective.)
¡
Playback from a desired time count is not available
with some discs or if the unit is in stop mode.
¡ If wrong numbers are entered, press the CLEAR/
C. RESET Button and re-enter the correct numbers.

MARKER

You can define the part to be called back.
1
Press the SEARCH MODE Button three
times during playback.
Set the marker
¡
Using the cursor (s/ B)
Button, position the cursor on
to the marker number shown as
"NOT SET". Press the ENTER
Button when the screen to be
reviewed appears. The marked time will be dis-
played. Up to 5 points can be marked.
Call back the marker
¡
Using the cursor (s/ B) Button, position the cursor
on to the marker number to be called back and press
the ENTER Button.
Clear the marker
¡ Using the cursor (s/ B) Button, position the cursor
on to the marker number to be cleared and press the
CD DVD
CLEAR/C. RESET Button.
To clear all markers, place the cursor on "AC" (All
clear markers) and press the ENTER Button.
2
DVD CD
1
¡
The program setting menu screen will appear.
2
TIME 1:23:30
TOTAL 1:29:00
3
Note
¡ Program playback is not available during random playback.
1
For DVDs
DVD CD
¡ A single title or chapter is played back repeatedly.
¡ Pressing the REPEAT Button cycles the display on
the screen as follows.

REPEAT

[OFF]
No repeat playback.
1 2 3 4 5 AC
NOT SET
For audio CDs
¡ The whole disc or a single track is played back
repeatedly.
¡
Pressing the REPEAT Button cycles the display on
the screen through Off, Track and All.
– 29 –
Press the SEARCH MODE Button or the
RETURN Button to exit the display.

RANDOM (Audio CD)

Press the MODE Button in stop mode.
Press the MODE Button
again.
Press the PLAY Button.
Random playback will then start.
REPEAT
Press the REPEAT Button.
REPEAT
[CHAPTER]
The current Chapter is
played back repeatedly.
CD
RANDOM
START : PLAY EXIT : MODE
DVD CD
REPEAT
[TITLE]
The current Title is
played back repeatedly.
EN
2C15