Descargar Imprimir esta página

Gardigo 70490 Instrucciones De Uso página 4

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 10
MITE BLOCKER
Instruction manual
Art.-No. 70490
Dear client,
congratulations for choosing one of our quality
products. Please follow these instructions ca-
refully and keep them with you.
1. Product description
The innovative mite blocker from Gardigo.
Battery-operated, mobile and highly effec-
tive. This is a modern animal repellent de-
vice. It generates a frequency in the range of
40 – 42 kHz. The optimum effective range of
the special generated tone frequencies is ap-
proximately 6 m². Since the tone frequencies
are intolerable for the animals, they avoid the
area. Consistent functionality is assured by the
fine-tuned electronics. The integrated LED as-
sists with rapid orientation in many situations.
Mite Blocker against bedbugs and mites. Take
the device along, for example to your hotel, or
protect your bed any time you want. The L6 can
protect people against dust allergies and aca-
rodermatitis (skin irritation caused by mites)
or other illnesses caused by bedbugs (genus
Cimex lectularius) such as Q fever or hepatitis
B. Effectiveness against mites was proven by
the University of Milan (Italy). Without the
need for bothersome cabling, this new device
from Gardigo can now be immediately used in
all imaginable places.
2. Operating mode
New electronics means minimal power con-
sumption. The device emits high-frequency
sounds.
3. Technical data
• Battery-operated:
2 x AAA Micro (not included)
• Effective range: Approx. 30 m² indoor and
6 m radius outdoor
• Frequency: 40 – 42 kHz +/– 10 %
• Volume control: Infinite adjustment
• Light: LED ON/OFF
• Operating temperature and huminity:
– 20 °C to + 50 °C and ≤ 90 % R.H.
• Storage temperature and huminity:
– 5 °C to + 50 °C and ≤ 90 % R.H.
4. Replacement of the batteries
1. Remove the housing cover.
2. Remove the old batteries from its fitting.
3. Insert a new batteries size Micro (AAA).
When doing so, mind the correct polarity
as shown on the bottom inside the battery
fitting.
4. Reattach the casing cover to the casing
body.

Publicidad

loading