Channel Up And Channel Down; Input; Mute; Volume - Blackmagic Design Blackmagic Audio Monitor Manual De Instalación Y Funcionamiento

Using Blackmagic Audio Monitor
8
SOLO SOLO
LEFT RIGHT
CH CH

INPUT

INPUT
SDI 1080PsF/30 Ch 1&2
L
-3 0 +3
R
The volume level is displayed on the control panel LCD.
SOLO SOLO
LEFT RIGHT
To monitor right channel audio:
CH CH
Step 1. Press the Solo Right button. The button will become backlit green and your audio will play through
Step 2. Press Solo Right again to return to stereo audio monitoring.
-45 -30 -20

Channel Up and Channel Down

These buttons let you cycle through 16 channels of audio embedded in your SDI connection. Press the
channel up button to move up through 8 pairs of audio channels. Press the channel down button to move
down through the pairs of channels.
INPUT
INPUT
Repeatedly pressing the INPUT button cycles through the SDI, AES/EBU, Analog and HiFi inputs so you can
select which video and audio equipment you wish to monitor.
The selected audio input can also be heard via HDMI. The SDI Loop output always uses the SDI video and
audio input signal and is unaffected by the INPUT button.

MUTE

This button mutes Blackmagic Audio Monitor's control panel speakers and headphones. Muting the audio
will not affect your audio input and will only affect the speakers and headphones output. Pressing the MUTE
button again will restore audio to the control panel speakers or headphones. Alternatively, increasing the
volume will also restore audio.

VOLUME

This knob adjusts the volume for the speakers or headphones independently. Volume level is displayed on
the built in LCD. When headphones are connected, Blackmagic Audio Monitor's speakers will mute and
audio is outputted via headphones. Volume can easily be adjusted up or down by turning the volume knob
clockwise or counterclockwise.
the right speaker only.
SDI
L
-10 -3 0 +3
R
1080PsF/30 Ch 1&2