Conceptronic CMEDHOST Guía De Instalación Rápida página 22

ENGLISH
3 How to connect the Grab'n'GO media adapter to TV
3.1 Connection to your Television
Connecting the device with a TV (illustrated as follows)
The three RCA connectors (yellow, red, white color) of the AV cable should match with the
corresponding input jacks on your TV. If your TV has no Composite input available, use the
included SCART to Composite/Audio Adapter or the included S-VIDEO Cable (Video only! Use the
Composite cable for sound!)
NOTE:
The Conceptronic CMEDHOST can be used with a television or with a monitor.
When using a TV you have to use the S-Video or Composite cable (with or without SCART
Adapter). Please check the manual of your TV to select to correct input channel to display the
video output of the CMEDHOST. If you have used the CMEDHOST in VGA mode, please press the
TV button on your remote control to change the VIDEO output again to your TV.
When using the SCART adapter, set the switch on the adapter "INPUT". When set to "OUTPUT",
the signal of the CMEDHOST is not received correctly by the TV.
When using a monitor you have to use a monitor VGA cable and connect it to the VGA OUT (3)
connector. Press the TV button on the remote control (a number of times) until the monitor is
switched on automatically (out of Stand-By mode).
To switch between the various modes available (VGA, TV, S-VIDEO) you need to press the TV
button on the remote control.
22