Important Remarks; Basic Operation - Conceptronic CMEDHOST Guía De Instalación Rápida

ENGLISH
5

Important remarks

The maximum operational range of the remote control is about 5 meters.
1. Pull out the insulated film in the bottom of remote control when using remote control for the
first time.
2. Point the remote to the receiver on the front panel of the device.
The receiving angle is about ±30 degrees in the range of 5 meters.
3. Change the batteries when they are weak or empty.

5.1 Basic Operation

1. Plug the power adapter into a working electrical outlet and connect the other end of the
adapter to the device.
2. Switch the device on with the power switch on the top of the device. The Power LED will
become solid blue.
The device is now operational; you will see the DEVICE LIST / FILE LIBRARY on your screen if a
USB device (like a Harddisk or USB Flashdrive) or a Memory Card is connected to the
CMEDHOST. If the connected device contains a large quantity of files, it can take a little while
before the device is detected. Please wait for the DEVICE LIST / FILE LIBRARY screen.
Notices
• Usually, it is not necessary to change your video system (PAL/NTSC), but if the TV only
supports NTSC or PAL, you should use the TV button to select a color system to match your TV
system.
• If "AUTO START" is ON (press the SETUP button->SETUP MENU->PREFERENCES->AUTO START-
>ON), all files on the connected devices will be played automatically; Pressing the
STOP button can stop auto-playing and display a full file list of the selected partition.
• Press one of the / / / buttons to move the cursor, and use the
selection (enters media library, enters file folder, or starts playing files).
• Press the
/ STOP button button to stop playing and go back to FILE LIBRARY.
• Press the MENU button to show the DEVICE LIST or FILE LIBRARY.
• Press the
/ POWER button to enter/exit standby mode.
• We advise you to disconnect the device from power if the device will not to be used for a long
time.
26
/ ENTER button to confirm
/