Fronius TTB 80 G Manual De Instrucciones página 85

4
CAUTION!
Danger due to incorrectly fitted torch body.
This can result in damage to property.
▶
Ensure that the locking device is fully forward after fitting the torch body - only then
is the torch body properly fitted and locked.
Connect the power source to the grid and switch on
5
Press the gas-test button on the power source
6
Shielding gas flows out for 30 s.
Check the coolant flow:
7
You must be able to see a strong return flow into the cooling unit coolant container.
Perform a test weld and check the quality of the weld
8
85