Flexibridge Big Bridge Mode; Flexibridge Max Bridge Mode - AEG IAE84853FB Manual De Instrucciones

8.3 FlexiBridge Big Bridge mode

To activate the mode touch
the correct mode indicator . This mode
connects three rear sections into one cooking
zone. The front section is not connected and
operates as a separate cooking zone. You
can set the heat setting for each zone
separately.
Correct cookware position:
To use this mode you have to place the
cookware on the three connected sections. If
you use cookware smaller than two sections
the blinks on the display and after 1
minute the zone switches off.
Incorrect cookware position:

8.4 FlexiBridge Max Bridge mode

To activate the mode touch
the correct mode indicator . This mode
connects all sections into one cooking zone.
18 ENGLISH
until you see
Correct cookware position:
To use this mode you have to place the
cookware on the four connected sections. If
you use cookware smaller than three
sections the display shows
minute the zone switches off.
Incorrect cookware position:
8.5 PowerSlide
This function allows you to adjust the
temperature by moving the cookware to a
different position on the induction cooking
surface. This function automatically divides
the left cooking zones into three areas with
different heat settings. The hob detects the
until you see
position of the cookware and adjusts the pre-
set power level accordingly. You can place
and after 1