Main Menu Overview; Configure The General Settings - Hach AS950 Funcionamiento Básico

Main menu overview

Table 3 shows the main menu options.
Option Description
Configures data logging, the alarms and the sampling program.
Programming
Shows the sampling history (e.g., samples collected and missed samples). Shows the
measurement data (the data log).
Review Data
Collects a grab sample, moves the distributor arm to a selected bottle position or operates
the pump in the forward or reverse direction.
Manual Operation
Calibrates the sample volume, the attached sensors and the analog input (for flow pacing)
at the AUX port, if applicable.
Calibration
Saves measurement data, sample history and program settings to a memory stick. Copies
the program settings from a memory stick to the sampler.
Export/Import
Configures the sampler, sampler ports and attached sensors. Configures and calibrates the
liquid detector.
Hardware Setup
Shows the Status screen, event log, alarm log and memory use. Shows the status and
configuration of the AUX I/O port. Shows the cabinet temperature (AWRS sampler only).
Completes a diagnostic test of the attached sensors, distributor arm, keypad and display.
Shows the total run time, forward run time and reverse run time of the pump motor.
Diagnostics
Shows the instrument information (e.g., serial number). Configures the display settings (e.g.,
language, date and measurement units). Configures the security settings. Configures the
tubing life reminder setting. Erases the sampling history and/or the selected logs.
General settings
Operation
Configuration

Configure the general settings

1. Push MENU.
2. Select General Settings.
3. Select an option.
Table 3 Main menu options
English 5