Battery Power Supply; During Operation - Stiga ST 4851 AE Uso Y Mantenimiento

Ocultar thumbs Ver también para ST 4851 AE:
Tabla de contenido

Publicidad

Battery power supply

• Read the safety 
precautions contained in
the battery manual.
• Check the mains voltage 
corresponds to the
power supply voltage.
Permanent connection
of any electrical device to
the building mains must be
carried out by a qualified
electrician, in compliance
with the standards in force.
Improper connection can
cause serious personal
harm, including death.

2.3 DURING OPERATION

Work Area
• Do not use the machine 
in environments at risk of  
explosion, in the presence
of flammable liquids, gas or 
powder. Electrical contacts 
and mechanical friction can 
generate sparks that can 
ignite the powder or vapours.
• Work only in daylight or 
with good artificial light in 
good visibility conditions. 
• Keep persons, children and
animals away from the working 
area. Get another adult to keep 
the children under supervision.
• Exercise extreme caution 
when operating on or crossing 
gravel drives, walks or roads. 
Stay alert for hidden hazards. 
• Look out for traffic when using 
the machine near the road.
Behaviour
• Do not place the discharge
chute against the wind, or at 
people, animals, vehicles, 
houses and anything else 
that could be damaged by the 
snow or by objects hidden 
in the snow. Never allow 
anyone in front of the unit.
• Never use the snow 
thrower near fences, cars, 
windows, glass enclosures, 
etc. without having first 
adjusted the deflector on 
the discharge chute.
• Keep hands and feet away 
from rotating parts. Always 
keep your distance from 
the snow discharge chute. 
Keep clear the discharge
opening at all times.
• Keep hands and feet away 
from rotating parts. Always 
keep your distance from the 
snow discharge chute.
• If the snow thrower strikes 
foreign bodies or displays 
anomalous vibrations, remove 
the battery and carefully 
inspect the machine to check 
there is no damage. Vibrations 
are normally synonymous with 
a problem. Repair any damage 
before re-using the machine
• Before  leaving the machine, 
disconnect all the commands 
and remove the battery.
• Before cleaning, repairs or
inspections, always check the 
rotating units have stopped,
controls are disengaged and
the battery is removed.
• Never operate the snow 
thrower at high transport 
speeds on slippery 
surfaces. Use care when 
reversing. Look behind you 
to make sure there are no 
obstacles before and during
operations in reverse gear.
• Disengage power to the 
auger when snow thrower is 
transported or not in use.
EN - 3

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

St 8051 aeSt 515 liSt 615 li

Tabla de contenido