Silver Cross SIMPLICITY INFANT CARRIER Manual De Instrucciones página 9

3
4
A
B
C
Fitting and using the
sun/wind canopy
3 Place the Simplicity Infant
Carrier on a level floor surface
with the handle positioned in
the stable position.
Remove your baby from the
Simplicity Infant Carrier.
To fit the sun/wind canopy slide
the two plastic attachment arms
(A) into the holes located on
either side of the Simplicity
Infant Carrier (B).
Make sure that both plastic
attachment arms are positioned
and locked correctly into the
fixing holes.
Make sure that the fabric of the
sun/wind canopy is positioned
around the back of the infant
carrier shell. Holding the rim of
the sun/wind canopy, gently pull
the front frame of the canopy
forward to fully open.
4 To remove the sun/wind canopy,
press the release levers (C) on
both arms and remove
9