BRITAX Child Safety, Inc.
8. Check for proper harness
height and pull any excess
slack up to the child's
shoulder area before
tightening.
9. Slowly pull the adjuster
strap to tighten the
harness around the child.
NOTE: Snugly adjust the
belts provided with this
child restraint around your
child. A snug strap should
not allow any slack. It lies
in a relatively straight line
without sagging. It does
not press on the child's
flesh or push the child's
body into an unnatural
position. You should not be
able to pinch excess.
10. Fasten the chest clip
and place at armpit
level.
28
Table of Contents