Child Seat Functions; Adjusting The Harness - Britax B-SAFE GEN2 Guia Del Usuario

BRITAX Child Safety, Inc.

Child Seat Functions

Adjusting the Harness

The infant car seat is assembled with the harness in the
inner loop.
• Inner Loop: For infants
weighing less than 11 lbs (5 kg).
• Outer Loop: For infants
weighing over 11 lbs (5 kg).
IMPORTANT:
should be located in the closest
harness height position at or
below the child's shoulders.
IMPORTANT:
on the harness yoke�
1. Loosen the infant car seat
harness by pressing the
harness adjuster release
lever and pulling both
harness straps forward.
2. Locate the harness yoke
on the back of the infant
car seat and slide one
harness strap off of the
yoke.
30
The harness straps
Ensure the harness straps are fully secured
Table of Contents
Inner Loop
Outer Loop