Troubleshooting; Specifications - Emos ESW5003 Manual Del Usuario

TROUBLESHOOTING

Problem / Symptom
Strange or no measurement of Rain Sensor
Strange or no measurement of Thermo / Hygro
Sensor
Strange or no measurement of Wind Speed and
Direction
and (Signal lost for 15 minutes)
and (Signal lost for 1 hour)

SPECIFICATIONS

CONSOLE
Dimensions (W x H xD)
Weight
Main power
Backup battery
Support sensor
RF frequency
RADIO-CONTROLLED / ATOMIC CLOCK
Synchronization
Clock display
Hour format
Calendar
Weekday in 5 languages
Time signal
DST
INDOOR BAROMETER
Barometer unit
Measuring range
Accuracy
Resolution
Weather forecast
Memory modes
Alarm
INDOOR TEMPERATURE
Temperature unit
Operating range
Resolution
Accuracy
Memory modes
Alarm
202 x 138 x 38mm
530g with backup batteries
DC 5V, 600mA adaptor
3 x AAA size 1.5V batteries (Alkaline batteries recommended)
Wireless 5-in-1 sensor (Wind speed, Wind direction, Rain gauge, thermo-hygro)
868Mhz
Auto or disabled
HH:MM:SS / Weekday
12hr AM / PM or 24hr
DD/MM
EN, FR, DE, ES, IT
DCF
AUTO / OFF
hPa, inHg and mmHg
540 ~ 1100hPa
(700 ~ 1100hPa ± 5hPa) / (540 ~ 696hPa ± 8hPa)
(20.67 ~ 32.48inHg ± 0.15inHg) / (15.95 ~ 20.55inHg ± 0.24inHg)
(525 ~ 825mmHg ± 3.8mmHg) / (405 ~ 522mmHg ± 6mmHg)
Typical at 25°C (77°F)
1hPa / 0.01inHg / 0.1mmHg
Sunny/Clear, Slightly Cloudy, Cloudy, Rainy, Rainy/Stormy and Snowy
Max & Min from last memory reset (with time stamp), Historical data of past 24 hours
Pressure change alarm
°C or °F
-5°C to 50°C (14°F to 122°F)
1 decimal place
+/- 1°C or 2°F typical @ 25°C (77°F)
Max & Min from last memory reset (with time stamp), Historical data for last 24hrs
Hi / Lo Temperature Alert
18
Solution
1. Check the drain hole in the rain collector.
2. Check the balance indicator
1. Check the radiation shield.
2. Check the sensor casing
1. Check wind cups (Anemometer).
2. Check the wind vane.
1. Relocate the main unit and 5-in-1 sensor
closer to each other.
2. Make sure the main unit is placed away from
other electronic appliances that may interfere
with the wireless communication (TVs,
computers, microwaves).
3. If problem continues, reset both main unit and
5-in-1 sensor.
.
.