Making Espresso; Making Cappuccino - Breville PrimaLatte VCF045X Instrucciones De Uso

using your Breville
Move the handle to the right as far as it will go until it lines up with the locked symbol
( ) on the unit. To remove the filter holder, move the handle to the left until it is lined up with the unlocked
symbol ( ).
Emptying the filter holder
! Caution: The filter holder will be HOT—take care when handling it!
To empty the used coffee from the filter holder, position the filter lock over the rim of the filter and hold it in
place with your thumb (fig. N). This will hold the filter in place so you can invert and tap the filter holder to
remove the used coffee.

MAKING ESPRESSO

1. Fit a filter to the filter holder (single shot, double shot or pod).
2. Add the ground coffee and tamp it down or, if using pods, place a pod into the pod filter.
3. Fit the filter holder to the brewing head.
4. Place a suitable cup under the brewing head. Use the height adjustment tray if necessary.
5. Press the Espresso button. If you are making a single shot, press it once. The small cup icon (
light. For a double shot, press the button twice. The large cup icon
( ) will light. Your espresso will be brewed and when the brewing cycle has finished, the three
buttons will light up.
6. You can stop the brewing process at any time by pressing any button.

MAKING CAPPUCCINO

Cappuccino is made with about ⅓ Espresso, ⅓ steamed milk and ⅓ frothed milk.
1. Fit a filter to the filter holder. For a large Cappuccino fit the double shot filter otherwise, use the single
shot or pod filter.
2. Add the ground coffee and tamp it down. If you are using pods, place a pod into the pod filter.
3. Fit the filter holder to the brewing head.
4. Place a suitable cup under the brewing head.
5. Add milk to the milk tank then position the froth tube over the cup using the lever. Adjust the amount of
froth required using the froth control. For more froth, turn the knob in the + (plus) direction. For less, turn
it in the ­ − (minus) direction. Note that you can make adjustments during the brewing cycle.
Press the Cappuccino button. For a small cappuccino press it once. The small cup icon (
6.
For a large Cappuccino, press the button twice the large cup icon (
be brewed and when the brewing cycle has finished, the three buttons will light up.
7. You can stop the brewing process at any time by pressing any button.
8
PrimaLatte™
®
) will light.
) will light. Your Cappuccino will
) will