Operational Safety Guidelines; Operating Instructions - Motorola IMPRES NNTN8845 Guia Del Usuario

Operational Safety Guidelines

• The radio can be in ON state only when the data is transmitted
wirelessly (i.e. via Wi-Fi). Otherwise, turn OFF the radio.
• This equipment is not suitable for outdoor use. Use only in dry
locations/conditions.
• Connect equipment only to an appropriately fused and wired supply
of the correct voltage (as specified on the product).
• Disconnect from line voltage by removing the main plug from the
outlet.
• The socket outlet to which this equipment is connected should be
close and easily accessible.
• Maximum ambient temperature around the charger must not exceed
40 °C (104 °F).
• Make sure the cord is located where it will not be stepped on, tripped
over, or subjected to water, damage, or stress.
• Output power from power supply unit must not exceed the ratings
stated on the product label located on the bottom of the charger.

Operating Instructions

The IMPRES Adaptive Charger System is a fully automated battery
care system. All a user needs to do is follow these simple steps:
1. Place the radio / IMPRES battery into the charger.
2. Remove the radio / IMPRES battery when it's fully charged (LED
turns steady GREEN).
The charger pocket accommodates either a radio with an IMPRES
battery attached or an IMPRES battery alone. Prior to charging a
radio with an IMPRES battery, radio can be in the ON state only
when the radio is transmitting data wirelessly. Otherwise, turn
OFF the radio. Batteries charge best at room temperature.
Additionally, the charger is equipped with 2-USB Type A Power
Outputs that facilitates the charging of two wireless device by a
constant 2.5 W of power ( 5 V at 500 mA) per connector.
3