Automatic Reconditioning; Reconditioning Switch - Motorola IMPRES NNTN8845 Guia Del Usuario

reconditioning). The process is automatic, includes an initial
reconditioning of the battery, and begins charging upon completion of
this process. This process requires time to initialize the battery, so the
battery should be left in the charger for approximately 12 hours or more
to complete the process. Do not remove the battery from the charger
until the Steady Green light is on.

Automatic Reconditioning

The Motorola IMPRES Adaptive Charger, when used in conjunction
with a Motorola IMPRES battery, has the ability to determine when it is
appropriate to recondition the battery (see IMPRES Feature/Benefit
Description section for complete list of IMPRES benefits).
When an IMPRES battery is properly inserted into the charger, the
charger determines if it is appropriate to recondition the battery. If the
battery needs reconditioning, the charger automatically indicates a
Steady Orange. This process may take up to 12 hours or more to
complete, depending upon the state of charge and capacity rating of
the battery when it is inserted.
It is important to note, for this process to be effective, the IMPRES
battery must be allowed to complete the recondition/recharge process.
Leave the battery in the charger until the charger indicates a Steady
Green.
At the completion of the recondition cycle, the charger automatically
recharges the IMPRES battery.

Reconditioning Switch

The charger is equipped with a switch on the bottom of the unit that
can be utilized to manually terminate the reconditioning process (as a
systemic, on-going use-case). However, the charger will continue to
provide an indication that the battery needs to be reconditioned.
6