Cleaning And Storage; Technical Specifications - JOCCA 6644 Manual De Instrucciones

20-E
How to thread the sewing machine:
Note: The thread must run from the highest right part of the reel.
Before placing the reel you must create a spring in its place.
-Thread it as indicated in drawings 7, 8 and 9.
-Pass the thread through the thread guide located in the arm of
the needle (see drawing 7).
-Pass the thread through the upper part of the tension control.
Do not reel it totally around the tension control (see drawing 8).
-User the threader to pass the thread through the hole of the nee-
dle eye from the front to the back (see drawing 9).
fig 8
fig 7
Adjusting the tension of the thread:
-If the stitch is too tight, turn the tension control a little to the left.
-If the stitch is too loose, turn the tension control a little to the
right.
To place a normal thread reel (see drawing 10):
-Loosen the nut of the reel and remove the reel.
-Slide the reel of thread through the extension shaft.
-Connect the extension shaft to the handle of the reel.
To replace the needle:
-Loosen the screws with a screwdriver and remove the old nee-
dle.
-Always use a sewing needle nº 14 DHx1 type.
-The needle must be installed with the plain side of the needle in
the front part of the machine (see drawing 11).
Note: Use the machine for 10 seconds and stop it 5 seconds.
Then you can use it again.
fig 9

CLEANING AND STORAGE

-Never immerse the appliance in water or any other liquid. Use a
damp cloth or sponge to clean it.
-Do not use abrasive detergents or products that may damage
the appliance.
-Keep the appliance in a safe place.

TECHNICAL SPECIFICATIONS

6V DC (4x AA 1.5V)
This sewing machine is compliant with the safety requirements
and provisions of directives 2004/108/EC on Electromagnetic
Compatibility.
PROTECTION OF THE ENVIROMENT – DIRECTIVE
2002/96/EC
This product has been designed and manufactured with high
quality materials and components that can be recycled and reu-
sed.
When you see the symbol of a crossed out litter bin on wheels
next to a product, this means that the product conforms to the
European Directive 2002/96/EC.
Please obtain information about the local recycling system for
electric and electronic products.
Follow the local rules and do not dispose of used products by
throwing them in the normal bins at home. Proper recycling of
your used product will help avoid negative impacts on the environ-
ment and people's health.
E-21