Preparation; Product Contents; Inserting/Changing Batteries; Selecting A Location - EASYHOME GT-FSI-07-US Manual Del Usuario

Remote controlled wall sockets

Preparation

Checking the remote controlled wall sockets and the

product contents

NOTICE!
Risk of damage!
If you are not cautious when opening the packaging with
a sharp knife or other pointy object, you may damage the
remote controlled wall sockets.
− Be very careful when opening.
1. Take the remote controlled wall sockets out of the packaging and check
whether the remote controlled wall sockets or the individual parts exhibit
damages. If this is the case, do not use the remote controlled wall sockets.
Contact the manufacturer at the service number specified on the warranty
card.
2. Check to make sure that the product is complete (see Fig. A).
Inserting⁄changing batteries ging batter
1. Push the battery compartment cover in the direction of the arrow compartment c mpartment c
to open it (see Fig. B). Fig. Fig. B B).
2. If necessary, clean the contacts of the battery and the battery ry, clean the con , clean the con
compartment tment tment 12 12 . . .
3. Insert the enclosed battery or a battery of the same type (A23/12 V) in the enclosed enclosed
battery compartment. Be absolutely sure to take note of the polarity. part part
4. Slide the battery compartment cover back onto the battery compartment.

Selecting a location

WARNING!
Risk of electric shock and damage!
A faulty electrical installation or excessive line voltage may
result in an electric shock.
AFTER SALES SUPPORT
USA
1-866-558-8096
out of the packa t of the packa
ockets or the ind ets or the ind
use the remote use the remote
e service numbe vice numbe
he product is co product is c
ng batte
).
USA
Preparation
ma
11
service@801service.net