Care And Storage; Cleaning The Remote Controlled Wall Sockets - EASYHOME GT-FSI-07-US Manual Del Usuario

USA

Care and storage

• radiation of antennas associated with the distance between transmitters or
receivers and conductive surfaces or objects (including the human body or
ground)
• broad-band disruptions in urban environments that reduce the signal-
to-noise ratio; the signal is not recognized in case of such "noise"
• radiation of insufficiently shielded electronic devices, e.g. openly operated
computers or similar
The effectively achievable distance between the transmitter and receiver in
normal operation depends on the installation location and environment.
Generally, proper operation of all components without problems with respect
to the receipt of wireless signals should be possible.
Under certain circumstances, problems with wireless communication between
the receiver and transmitter may occur and you will not be able to switch the
remote controlled wall sockets on or off.
− In this case, pull the remote controlled wall socket out of the permanently
installed socket and insert it again.
Care and storage

Cleaning the remote controlled wall sockets

NOTICE!
Risk of short circuit! cuit! cuit!
Water that has penetrated the housing may cause a short circuit. s penetrated s penetrated
− Never submerge the remote controlled wall sockets in water. merge the mer ge the
− Make sure that no water penetrates the housing. hat n hat no
NOTICE!
Risk of damage!
Using unsuitable cleaners could damage the surface of the
remote controlled wall sockets and the remote control.
− Do not use any aggressive cleaners, sharp or metallic
cleaning utensils such as brushes with metal or nylon
bristles.
− Do not use any solvents or abrasives.
16
service@801service.net
Remote controlled wall sockets
be able to sw
cket out of the p ket out of the
ontrolled w trolled w
munica ica
ble to
AFTER SALES SUPPORT
USA
1-866-558-8096