Troubleshooting - EASYHOME GT-FSI-07-US Manual Del Usuario

USA

Troubleshooting

Troubleshooting
Some malfunctions may be caused by minor faults, which you can resolve
yourself. Follow the instructions in the following table for this.
If it is still not possible to resolve the problem with the remote controlled wall
socket, contact customer service. Do not attempt to repair the remote
controlled wall socket yourself.
Problem
The remote controlled
wall socket cannot be
switched on or off.
Another remote
controlled wall socket
has inadvertently
responded to the
command from the
remote control.
One of the remote ote ote
controlled wall
sockets automatically ally ally
switches off.
18
service@801service.net
Possible cause
The range of the
wireless signal has been
exceeded.
The battery of the remote
control is empty.
The signal transmission ion
is disrupted or the
assignment of the the
channels was deleted. as deleted. eleted.
The assignment is gnment is ment is
incorrect. rect. .
The The assignment is The a
incorrect. inc inc
Remote controlled wall sockets
Troubleshooting
Reduce the distance
between the remote
control and the remote
controlled wall socket. lled w d w
Replace the battery with place the batt ce the b
a battery of the a battery of the same attery of th
type. type. type.
Refer to the chapter Refer to t Refer to t
"Addit "Additional notes". "Addi
Assign the channels to
the remote controlled
wall sockets (see chapter
"Assigning channels").
Assign the channels to
the remote controlled
wall sockets (see chapter
"Assigning channels").
AFTER SALES SUPPORT
USA
1-866-558-8096