Leuze electronic ODS 9 Manual De Instrucciones página 26

EN
Part number code
Please refer to the part number code for your device model.
ODS9L2.8/LA6-100-M12
ODS
9
L
.8
L
A/6/K/X/FH/QZ
6/K/X
-100
-M12
26
Optical distance sensor
9 series
Laser class:
– L1: Laser class 1 acc. to IEC 60825-1:2014
– L2: Laser class 2 acc. to IEC 60825-1:2014
Display with control buttons
Pin 4:
– IO-Link
– OUT1 (if IO-Link is not used)
Pin 2:
– A: Analog output
– 6: Push-pull switching output
– K: Multifunction input (default: teach input)
– X: Not assigned (n. c.)
– FH: RS 232 serial interface, Rx signal
– QZ: RS 485 serial interface, Rx-/Tx- signal
Pin 5:
– 6: Push-pull switching output
– K: Multifunction input (default: teach input)
– X: Not assigned (n. c.)
Measurement range:
– -100: Measurement range 50 ... 100 mm
– -200: Measurement range 50 ... 200 mm
– -450: Measurement range 50 ... 450 mm
– -650: Measurement range 50 ... 650 mm
Connection:
– -M12: M12 connector, 5-pin, A-coded