Operation Tips; Helpful Information - LG CL12F.N50 Manual De Propietario

MAINTENANCE
16
MAINTENANCE
Clean the product regularly to maintain
optimal performance and to prevent possible
breakdown.
CAUTION
!
• Turn off the power and unplug the
power cord before you perform any
maintenance; otherwise it may cause
electric shock.
• Never use water that is hotter than
40 °C when you clean the filters. It may
cause deformation or discoloration.
• Never use volatile substances when you
clean the filters. They may damage the
surface of the product.

Operation Tips!

• Do not overcool the room.
This is not good for the health and wastes
electricity.
Keep blinds or curtains closed.
•
Do not let direct sunshine enter the room
when the air conditioner is in operation.
Keep the room temperature uniform.
•
Adjust the vertical and horizontal airflow
direction to ensure a uniform temperature in
the room.
• Make sure that the doors and windows are
shut tight.
Avoid opening doors and windows as much
as possible to keep the cool air in the room.
Clean the air filter regularly.
•
Blockages in the air filter reduce the airflow
and lower cooling and dehumidifying
effects. Clean at least once every two
weeks.
Ventilate the room occasionally.
•
Since windows are kept closed, it is a good
idea to open them and ventilate the room
now and then.
When the air conditioner is not
going....
When air conditioner is not going to be used
for a long time.
1
Operate the air conditioner at the following
settings for 2 to 3 hours.
• Type of operation: Fan operation
mode.(Refer to page "Fan Mode")
• This will dry out the internal mechanisms.
2
Turn off the breaker.
CAUTION
!
Turn off the breaker when the air
conditioner is not going to be used for a
long time. Dirt may collect and may cause
a fire.
3
Remove the batteries from the Remote
Controller.

Helpful information

The air filters and your electric bill.
If the air filters become clogged with dust, the
cooling capacity will drop, and 6 % of the
electricity used to operate the air conditioner
will be wasted.
When the air conditioner is to be
used again.
1
Clean the air filter and install it in the indoor
unit. (Refer to page "Maintenance and
Service")
2
Check that the air inlet and outlet of the
indoor/outdoor unit are not blocked.
3
Check that the ground wire is connected
correctly. It may be connect to the indoor
unit side.