Mode 2 - Base-N; Bases Conversions; Negative Expression - Citizen SRP-280N Manual De Instrucciones

limit value, or lower spec. limit value, please choose
LIMIT–SET . To change ax, please choose DISTR .
3. Press [
4. To change an entry, display it and enter the new data. The
new data you enter overwrites the old entry. Press [
[
(Note) : Even you exit STAT mode, all data in 1–VAR and
2–VAR mode are still retained unless you clear all data
by selecting D–CL mode.

Mode 2 - Base-n

Bases conversions

The number system (10, 16, 2 , 8 ) is set by pressing [ 2nd ] [ dhbo ]
to display the menu, making one of the items underlined followed
[ ]. A corresponding symbol – " d ", " h ", " b ", " o " appears
on the display. (The default setting is d : decimal base).
Example 58.
(Note) : The total range of numbers handled in this mode is 0, 1,
2, 3, 4, 5, 6, 7, 8, 9, /A, IB, IC, ID, IE, IF. If values not
valid for the particular number system are used, attach
the corresponding designator ( d , h , b , o ), or an error
message will appear.
Binary base ( b ) : 0, 1
Octal base ( o ) : 0, 1, 2, 3, 4, 5, 6, 7
Decimal base ( d ) : 0, 1, 2, 3, 4, 5, 6, 7, 8, 9
Hexadecimal base ( h ) : 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, /A, IB, IC, ID, IE,
Pressing [
binary base which exceeds 8 digits. The system is designed to
display up to 4 blocks. See Example 59.

Negative expression

In binary, octal, and hexadecimal bases, the calculator represents
negative numbers using complement notation. The complement is
the result
100000000000000000000000000000000 in that number's base
by pressing [ NEG ] key in non-decimal bases. See Example 60.
File name : CBM_SR285,A_HDBSR285T19_English.doc
version : 2010/04/26
] to scroll through the data you have entered.
] to save the change.
IF
] can use block function to display a result in octal or
of subtracting
E – 19
that number
] or
See
from