GE 29879 Manual De Instrucciones página 9

5. Slip the mounting holes over the wall plate posts and slide the unit
down firmly into place.
6. Set the TONE/PULSE switch on the side of the handset to TONE for touch-
tone service or PULSE for rotary service.
7. Set the RINGER VOLUME switch as desired.
• HI = Loudest sound
• LO = Sound will be lower.
• OFF = Telephone will not ring
8. The unit is properly installed if you pick up the handset and hear the dial
tone. Otherwise, recheck all installation steps.
7
5
6
9