Guidance and Manufacturer's Declaration - Electromagnetic Immunity
Immunity Test
Radiated RF
IEC 61000-4-3
Note:
These guidelines may not apply in all situations. Electromagnetic propagation is affected by
absorption, and reflection from structures, objects and people.
Warranty
Medtronic MiniMed, Inc. (or such other legal entity as may be referred to as manufacturer
on the labeling of this device "Medtronic MiniMed") warrants the Medtronic transmitter to
the purchaser of the product against defects in material and workmanship for a period of
one (1) year and the charger for up to one (1) year from the date of purchase.
During the warranty period, Medtronic MiniMed will replace or repair, at its discretion, any
defective transmitter or charger, subject to the conditions and exclusions stated herein.
This warranty applies only to new devices. In the event a transmitter or charger is
replaced, the warranty period will not be extended past its original expiration date.
This warranty is valid only if the Medtronic transmitter or charger is used in accordance
with the manufacturer's instructions. Without limitation, this warranty will not apply:
• If damage results from changes or modifications made to the transmitter or charger
by the user, or third persons, after the date of purchase.
IEC 60601-1-2:2014
Test Level
10 V/m
80 MHz to 2.7 GHz
80% AM at 1 kHz
Max foreseeable
use condition per
IEC
60601-1-2:2014
10 V/m
80 MHz to 6 GHz
80% AM at 1 kHz
-26-
Electromagnetic
Environment Guidance
Portable and mobile RF
communications
equipment should be used
no closer to any part of
the transmitter than the
recommended separation
distance of 30 cm (12 in).
Field strengths from fixed
RF transmitters, as
determined by an
electromagnetic site
survey, should be less
than the compliance level
in each frequency range.
Interference may occur in
the vicinity of equipment
marked with the following
symbol: