Allied Telesyn AT-8600 Serie Guía De Instalación Y Seguridad página 15

Installation & Safety Guide
Link and Mode LEDs for the AT -8624T/2M switch
LED
Mode - FULL
Mode - ACT
Note Use the Mode Select button to toggle the Mode LEDs to the PoE state.
Toggling the Mode Selection button does not affect the normal operations of the
switch.
Link and Mode LEDs for the AT -8624PoE switch
LED
L/A Status
(Top LED)
100 Mbps Link
100 Mbps Activity
10 Mbps Link
10 Mbps Activity
Mode LEDs
(Bottom LED)
D/C Mode
Full Duplex
Half Duplex
State Description
OFF The port is operating in half-duplex
mode.
Green The port is operating in full-duplex
mode.
OFF There is no activity on the port.
Flashing Green There is activity on the port. It is
transmitting and/or receiving data.
State
OFF
Green
Flashing Green
Red
Flashing Red
OFF
OFF
Green
Red
Description
There is no link between the port
and the end-node.
The port is operating at 100 Mbps.
There is activity on the port. It is
transmitting and/or receiving data
at 100 Mbps.
The port is operating at 10 Mbps.
There is activity on the port. It is
transmitting and/or receiving data
at 10 Mbps.
Either DC Mode or PoE Mode.
There is no link between the port
and the end-node.
The port is operating in full duplex
mode.
The port is operating in half-duplex
mode.
15