Haier HRB15N3 Instrucciones De Instalación página 10

Ocultar thumbs Ver también para HRB15N3:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

INSTALLATION INSTRUCTIONS
13. Move the door closure to the opposite side. Flip over
the door closure so that the curved edge of the closure
is toward the center of the door.
14. Remove innermost screw. Fit the door closure on top
of the door stop screw, and fasten with the innermost
screw.
A
Door Closure
REMOVE AND REVERSE FREEZER DOOR
1. Remove the two screws attaching the center hinge to
the bottom of the refrigerator compartment. Remove
the center hinge and save for possible future use.
Screws
2. Lift the freezer compartment door from the bottom
hinge.
3. Move the hole plugs and the screw to the opposite side.
A
A
10
A
Hole Plugs
READ AND SAVE THESE INSTRUCTIONS
4. Using a Phillips screwdriver, remove the two screws
fastening the plastic door closure and the metal door
stop to the bottom of the door.
A
B
5. Remove the screw from the door closure, and replace
the screw into the hole from which it was removed.
6. Move the door stop to the opposite side. Insert screw
into the center hole and fasten.
A
Screw
B
Door Stop
7. Move the door closure to the opposite side. Flip over the
door closure so that the curved edge of the closure is
toward the center of the door.
A
Door Closure
B
Door Stop
A
B
49-1000580 Rev. 0

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido