Haier HRB15N3 Instrucciones De Instalación página 12

INSTALLATION INSTRUCTIONS
7. Remove the new hinge cover from the accessory
bag. Insert the wiring cable through the clips on the
underside of the cover, and then fit the cover over the
hinge.
A
Wiring Cable
A
8. Flip the hinge screw cover, and insert it into the interior
edge of the door.
A
Hinge Screw Cover
9. Replace the door top plate.
A
Placa superior
12
A
A
READ AND SAVE THESE INSTRUCTIONS
10. Connect the ends of both wire harnesses.
NOTE:
opening.
A
A
Wiring Harnesses
B
Wiring Cover
11. Replace the wiring cover on top of the refrigerator
cabinet, and fasten with the four screws.
A
Screws
12. Insert the hinge screw covers into the wiring cover on
the top of the cabinet.
A
Hinge Screw Covers
B
A
A
49-1000580 Rev. 0