Lights; Vacation And Moving Care; Reinstalling/Using Refrigerator Again - Haier HRB15N3 Instrucciones De Instalación

Ocultar thumbs Ver también para HRB15N3:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

REFRIGERATOR CARE

LIGHTS

The interior lights of the refrigerator turn off when the doors
are open for more than 7 minutes.
IMPORTANT: Your refrigerator is equipped with LED
lighting. These lights are designed to last for the life of your
refrigerator. However, if the lights stop operating, please
contact a qualified technician for replacement.

VACATION AND MOVING CARE

VACATION
If You Choose to Leave the Refrigerator On While
You're Away:
1. Use up any perishables and freeze other items.
If You Choose to Turn Off the Refrigerator Before You
Leave:
1. Remove all food from the refrigerator and freezer.
2. Unplug refrigerator or disconnect power.
3. Clean refrigerator, wipe it, and dry well.
4. Tape rubber or wood blocks to the tops of both doors to
prop them open far enough for air to get in. This stops
odor and mold from building up.
49-1000580 Rev. 0
MOVING
WARNING
Excessive Weight Hazard
Use two or more people to move and install refrigerator.
Failure to do so can result in back or other injury.
When you are moving your refrigerator to a new home, follow
these steps to prepare it for the move.
1. Remove all food from the refrigerator and pack all frozen
food in dry ice.
2. Unplug refrigerator.
3. Clean, wipe, and dry thoroughly.
4. Take out all removable parts, wrap them well, and tape
them together so they don't shift and rattle during the
move.
5. Raise the leveling legs so they don't scrape the floor. See
"Leveling."
6. Tape the doors closed and tape the power cord to the back
of the refrigerator.
7. When you get to your new home, replace removable parts.
Refer to the "Installation Instructions" section to prepare
the refrigerator for use.
REINSTALLING/USING
REFRIGERATOR AGAIN
If the refrigerator has been placed in a horizontal or tilted
position for any period of time wait 24 hours before plugging
it in to allow the refrigerant to settle.
1. Clean refrigerator. See "Cleaning."
2. Place refrigerator in desired location and level. See
"Installation Instructions."
19

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido