Clock And Calendar Display Modes; Set Time / Date / Language; Set Alarm - Oregon Scientific RAR232 Manual Do Usuário

Repeat this step whenever you find that the temperature
displayed on the remote sensor is not the same as the
outdoor temperature display on the main unit.

CLOCK AND CALENDAR DISPLAY MODES

The clock and calendar share the same section of the
display. The calendar is displayed in a day-month format.
Press the MODE button to toggle between clock and
calendar display modes.
Clock mode

SET TIME / DATE / LANGUAGE

In this mode you can set the time, date, and display
language. If there is a setting you do not wish to adjust,
press MODE/SET to bypass it.
1. Press and hold MODE/SET for two seconds in clock
display mode. Press
format.
2. Press and hold MODE/SET to confirm.
3. Repeat the same procedures to set the hour, minutes,
year, month, day-of-month and display language.
Calendar mode
or to select 12 or 24 hour
4. Press MODE/SET to exit. The display will return to
the clock mode.
TIP: During setting, press and hold
increase or decrease a value.
NOTE The date is displayed in DAY-MONTH format. For
the display language, you can choose from English (E),
German (D), French (F), Italian (I), or Spanish (S).

SET ALARM

To set the alarm:
1. Press once to display the alarm time. If the alarm
is disarmed, the time will be displayed as
2. Press and hold
will blink.
3. Enter the hour by pressing either
4. Press . The minute digits will blink.
5. Enter the minutes by pressing either
6. Press to exit.
The alarm icon will be displayed indicating that the alarm
is now armed.
TIP:
• You can also arm or disarm an alarm by pressing the
button. Press MODE/SET to return to clock mode.
• Press any key on the unit to stop the alarm.
7
or to rapidly
for two seconds, the hour digits
or .
or
.
.