Indoor And Outdoor Temperature; Indoor Temperature; Outdoor Temperature; Maximum And Minimum Temperatures - Oregon Scientific RAR232 Manual Do Usuário

INDOOR AND OUTDOOR TEMPERATURE

If no readings are received from the remote unit for more
than 4 minutes, blanks, "
readings have been successfully searched. Check that
the remote unit is sound and secure. You can wait for a
little while or press and
immediate search.

INDOOR TEMPERATURE

The indoor temperature is shown in the second line of the
display.

OUTDOOR TEMPERATURE

The outdoor temperature is shown on the top line of the
display. The kinetic wave on the outdoor temperature
display shows if remote unit reception is connecting
properly.
NOTE If the temperature exceeds the temperature range
of the main or remote units "HHH" (above) or "LLL"
(below) will display.

MAXIMUM AND MINIMUM TEMPERATURES

The maximum and minimum indoor and outdoor
temperatures are automatically stored in memory. To
display them:
" will be displayed until further
simultaneously to force an
1. Press MEM to display the maximum temperature.
2. Press MEM again to display the minimum
temperature.
The respective indicators, MAX or MIN, will be displayed.

CLEAR MEMORIES

To clear the memory, press and hold MEM for two
seconds. If you wish to set the current temperature as the
min / max records, press MEM again.

LOW BATTERY WARNING

When it is time to replace the batteries, the respective low
battery indicator will appear on the indoor and outdoor
temperature windows.

RESET

Use this button when the unit is operating in an unfavorable
way or malfunctioning. Use a blunt stylus to hold down the
button. All settings will return to their default values.
8