Invacare WALKLITE 6300-5F Manual De Instrucciones página 7

1. Depress the snap buttons on the front leg extensions (with wheels)
of the walker and slide the leg extensions up or down to the desired
height. Ensure that the snap button protrudes through the appropri-
ate adjustment hole on the leg extension (FIGURE 3).
Adjustment
Hole
Snap Button
FIGURE 3 - INSTALLING/ADJUSTING LEG EXTENSIONS
2. Repeat STEP 1 for the rear leg extensions (with glide brakes).
3. Ensure all four (4) legs are adjusted so that the walker is level.
The leg extensions should be adjusted so the walker is level. If
an even height cannot be achieved, adjust the leg extensions
so that the rear of the walker is no more than one (1) inch
(2.5cm) lower than the front.
NOTE: Back rest not
shown for clarity.
Leg Extension
(with glide brake)
WARNING
7
Leg Extensions
(with wheels)