Glide Brake
Heel
WALKING
FIGURE 4 - USING GLIDE BRAKES
CARE AND MAINTENANCE
1. Ensure that ALL attaching hardware is secure at ALL times.
2. Check screw securing seat to walker for tightness. Tighten if necessary.
3. Make sure snap buttons release and re-engage properly.
4. Replace any broken, damaged or worn items immediately.
5. Check hand grips to ensure they do not twist on side frame. If hand
grips move, contact your Invacare dealer for service.
CARE OF WHEELED ACCESSORIES
1. Clean wheels with warm water and mild cleanser. Dry with clean rag.
2. Lubricate with 3-in-1®oil periodically or if wheels begin to squeak.
Glide Brake
Heel
Crutch tip
OFF the floor.
Ground/Floor
Surface
9
Crutch tip
ON the floor.
SITTING