KTM Power Parts 81235941044 Guia De Inicio Rapido página 4

2
1
4
5
Scope of supply:
1x Fan, complete
1x Fan wiring harness
1x Thermo switch
1x Aluminium seal ring
1x Fan holder
3x Screws
3x Blind rivet
Mounting
Remove the seat and tank. Drain the coolant and remove the right radiator.
1
Mount the fan on the fan holder using the three screws (1). Run the cables
1
as illustrated (2).
NOTE:
For Husaberg, only remove the right spoiler and the seat.
Mount the fan holder with the mounted fan on the right radiator, inserting
the 3 blind rivets included in the scope of supply in the holes provided
(3).
3
Mount the right radiator, remove the radiator plug and mount the thermo
switch (4) together with the aluminum seal ring (20Nm).
4
Connect the fan wiring harness to the two vacant connectors on the main
wiring harness (5). Make sure the cables are run neatly without kinks.
Hold the wiring harness in place with cable ties.
Connect the fan wiring harness to the thermo switch. Completely slide up
the rubber grommet (6).
Fill the cooling system and bleed as described in the Owner's Manual.
Check the fan for proper functioning.
6
58435041000
59011079000
78035045000
0603142015
81235943000
0081500181