Publicidad
Install wall plate covers and the wire management assembly (optional)
onto the wall plate.
1.
Mount the upper cover [05] using the 1⁄8 in. hex key [23] to install four
screws [27].
2.
Mount the lower cover [05] using the 1⁄8 in. hex key [23] to install
four screws [27] while (optional) fi tting the rear mount of the wire
managment assembly [04] between the cover [05] and the lower
horizontal of the wall plate [02].
Note: Do not install the rear mount of the wire management assembly
[04] unless you intend to install the front mount of the wire management
assembly [04] in Step 6.
[05]
[27]
4
[27]
4
?
[23]
6900-002066<02>
[23]
[27]
[04]
?
[05]
[02]
[05]
[04]
4
19
Publicidad
