Cable Glands - Scame ZENITH-P Instalación Uso Y Mantenimiento

ZENITH-P
3.6 DRILLING DRAIN BREATHER POSITION
DRAIN valve shall be installed always on the bottom face side.
Figure 6 – Position holes for breather/drain valve
Top/Bottom
Enclosure size
Face Sides A/C
(H x W x D)
W1 x D1
75x80x55 48 x 34
75x80x75 48 x 54
75x110x55 80 x 34
75x110x75 80 x 54
75x160x55 130 x 34
75x160x75 130 x 54
75x190x55 160 x 34
75x190x75 160 x 54
75x230x55 90 x 34 (x 2)
75x230x75 90 x 54 (x 2)
120x122x90 75 x 58
120x220x90 180 x 58
160x160x90 110 x 65
160x260x90 210 x 65
160x360x90 310 x 65
160x560x90 240 x 65 (x 2)
250x255x120 200 x 88
250x400x120 345 x 88
405x400x165 345 x 133
Table 5 - Standard entry arrangements

3.7 CABLE GLANDS

Use only Ex eb and/or Ex tb approved glands (as relevant). Certified cable glands can only be fitted with a suitable IP rating
commensurate with IP rating of the enclosure.
MP39688
Left/Right Face
Ø (mm)
Sides
M20
B/D - H2 x D2
28 x 28
27 x 48
28 x 28
27 x 48
28 x 28
27 x 48
28 x 28
27 x 48
28 x 28
Ø20,5/
27 x 48
21
60 x 52
60 x 52
84 x 56
84 x 56
84 x 56
84 x 56
168 x 81
168 x 81
323 x 126
17
Min. Ø (mm) Min.
(x/y) M25 (x/y)
Ø25,5/
16 20
26
Ø (mm) Min.
M16 (x/y)
Ø16,4/
16
16,8
ZP91041-2