Tabla De Contenido; General Information; Symbols Used In This Document - Grundfos SB Serie Instrucciones De Instalación Y Funcionamiento

English (GB) Functional profile and user manual
Original installation and operating instructions
These installation and operating instructions
describe Grundfos SB and SBA.
Sections 1-5 give the information necessary to be
able to unpack, install and start up the product in a
safe way.
Sections 6-10 give important information about the
product, as well as information on service, fault
finding and disposal of the product.
CONTENTS
1. General information
1.1 Symbols used in this document
2. Receiving the product
2.1 Inspecting the packaging
2.2 Scope of delivery
3. Installing the product
3.1 Location
3.2 Pump with float switch and side inlet
3.3 Connecting the outlet hose or pipe
3.4 Non-return valve
3.5 Pump position
3.6 Mechanical installation
3.7 Electrical connection
4. Starting up the product
4.1 SBA starting and stopping conditions
5. Handling and storing the product
5.1 Handling the product
5.2 Storing the product
5.3 Frost protection
6. Product introduction
6.1 Product description
6.2 SBA functions
6.3 Pumped liquids
6.4 Identification
7. Maintaining the product
8. Fault finding the product
9. Technical data
9.1 Operating conditions
9.2 Mechanical data
9.3 Electrical data
9.4 Dimensions
10. Disposing of the product
Read this document before you install the
product. Installation and operation must
comply with local regulations and accepted
codes of good practice.
This appliance can be used by children
aged from 8 years and above and persons
with reduced physical, sensory or mental
capabilities or lack of experience and
knowledge if they have been given
supervision or instruction concerning use
of the appliance in a safe way and
understand the hazards involved.
Children shall not play with the appliance.
Cleaning and user maintenance shall not
be made by children without supervision.
Page
Make sure that the system in which the
5
pump is incorporated is designed for the
5
maximum pump pressure.
6
6
This pump has been evaluated for use with
6
water only.
6
6

1. General information

6
7

1.1 Symbols used in this document

7
7
DANGER
7
Indicates a hazardous situation which, if
7
not avoided, will result in death or serious
8
personal injury.
8
WARNING
9
9
Indicates a hazardous situation which, if
9
not avoided, could result in death or
serious personal injury.
9
9
CAUTION
9
Indicates a hazardous situation which, if
9
not avoided, could result in minor or
9
moderate personal injury.
10
10
11
Tips and advice that make the work easier.
13
13
If these instructions are not observed, it
13
may result in malfunction or damage to the
13
equipment.
13
13
A blue or grey circle with a white graphical
symbol indicates that an action must be
taken.
A red or grey circle with a diagonal bar,
possibly with a black graphical symbol,
indicates that an action must not be taken
or must be stopped.
5