Using Rechargeable Batteries - Topcom TwinTalker 3300 Manual De Instrucciones

5.8. Using rechargeable batteries

IMPORTANT: Do not charge this unit using an AC/DC ADAPTER with
regular "AAA" alkaline batteries installed. Only use the optional
AC/DC ADAPTER with "AAA" rechargeable batteries (not included).
To use the PMR with an AC/DC ADAPTER and rechargeable batteries do
the following:
1. Insert four (4) "AAA" rechargeable batteries (not included).
2. Plug the 7,5 V DC / 200 mA ADAPTER (not included) into the EAR/MIC/
CHARGER JACK on the top of the unit and turn it ON by pressing the
POWER button.
NOTE: The unit cannot transmit calls while the batteries are being
charged. It takes approximately 8 to 10 hours to fully charge the
batteries.
5.9. Headset use
You can operate the PMR using a headset (not included).Plug the headset
into the EAR/MIC jack (5).
5.10. Sending Call Tones
You can use Call Tones to alert the other user to identify yourself. You can
also use Call Tones to signal the beginning or the end of a transmission.
1. Press and release the CALL button. The CALL TONE continues for 3
seconds.
2. Your CALL TONES will transmit to nearby receivers set to the same
channel.
5.11. Flashlight
Press and hold the Flashlight button to activate the light.
6. SPECIFICATIONS
Channels
CTCSS Sub-channel
Output Power (TX)
Range
Topcom Twintalker 3300
8 Channels
38 for each Channel
Output Power :0.5W (Maximum)
Up to 3 Km (open field)
ENGLISH
7