Charging The Batteries - Topcom Twintalker 9500 Manual De Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 35
Twintalker 9500

10 Charging the batteries

There are two ways to charge the battery of the PMR's :
10.1
Using the desktop charger
The desktop charger provides drop-in charging
conveniency.
1.
Put the desktop charger on a flat surface.
2.
Plug one end of the supplied adapter into an easy
accessible electric socket and the other end into the
connector on the backside of the desktop charger
28
.(See folded cover page - illustration 3)
3.
Put the radio in the charger as indicated.
29
4.
The charging LED
will turn on if it's properly
inserted and charging.(See folded cover page -
illustration 3)
10.2
Connecting the power adapter directly to the PMR
1.
Connect the connector of the power adapter directly
to the charger connection
3
of the PMR.
It will take about 8 to 10 hours to fully charge the batteries
Do not press the
-Button
PTT
Do not short-circuit the batteries or dispose in fire. Remove the batteries
if this device is not going to be used for a long period.
Do not charge non rechargeable batteries like Alkaline batteries in the char-
ger. This might damage the PMR's and charger unit.
12
of the PMR's while they are charging !
11
Description
See folded cover page - illustration 1
1.
ON/OFF Volume knob
2.
LCD display
3.
Charger connection
4.
Headset connection
5.
TX LED ( on when transmitting)
6.
Call button
7.
Menu button
– Enter the menu settings
8.
Microphone
9.
Speaker
10.
Down button
– Select previous value in the menu
11.
Up button
– Select next value in the menu
12.
PTT-button
13.
Antenna
See folded cover page - illustration 3
28.
Charger connection
29.
Charger LED ( on when charging)
12 LCD display information
See folded cover page - illustration 2
14.
CTCSS indication
15.
DCS indication
16.
CTCSS/DCS value
17.
Frequency indication in MHz
18.
MHz indication
19.
Keypad lock icon
20.
Call receive type indication
21.
Battery level indication
22.
Channel number
23.
RX icon
– Displayed when receiving
24.
TX icon
– Displayed when transmitting
25.
VOX indication
26.
Scanning indication
27.
Dual channel mode (DCM) indication
5

Publicidad

Tabla de contenido
loading

Tabla de contenido